

Console Table Build Plans
Simple Console Table with a drawer, MATERIALS: 1-1/2″ Pocket hole screws 2 Bottom drawer slide 1 Cabinet pull Wood glue Sandpaper (100, 150, 180, 220 grits) Finishing supplies (primer, paint & sealer). First cut a 2x2 into four 35" pieces for the legs. Next cut a 1x6 into a 51" and two 15" pieces. Using a pocket hole jig set to 5/8 drill holes on either end on one side of all three boards. Attach the boards flush with the top of the legs using wood glue and 1 1/2" pocket hole


The Bosch MRF23EVS
BOSCH MRF23EVS ROUTER This IS the best router for any job. For starters this router has the consistent power needed to move smoothly, with a 2.3 HP 15 Amp motor this router is the muscle car of routers. Micro depth adjustment on this router is as smooth as butter making setting the bit depth a breeze. The router comes with a LED lit clear acrylic plate that makes following a outline very easy. The soft start works amazingly for easing into the precise cut without jumping arou


Tutorial DIY Custom Monogramming
Recently, I have been monogramming gifts. Gifts made obviously for one person in mind seem to stand out more than a standard generic gift bought or made. Personalizing a project puts that professional touch and can be done without the use of a CNC machine. The process can be replicated for any application. Here I use it to make a custom table out of white oak, but you can use the same steps for anything including monogramming to sign building. Best Router For The Job I looked